Air Compressor Leg Massager is a pneumatic compression therapy device designed to provide rhythmic air pressure around the legs and feet. It uses inflatable air chambers to create sequential compression and release, supporting relaxation, muscle recovery, and temporary relief from minor muscle discomfort.
Air Compression Full Leg Massager – FE-7400
Product Introduction
The Air Compression Full Leg Massager (Model FE-7400) is designed for full leg massage using air compression technology. The device features 6 massage modes, 4 pressure levels and adjustable timing options of 10, 20 and 30 minutes.
The product includes a full-leg massage function and air compression operation. It provides different working modes and pressure intensity settings that can be selected according to individual requirements.
Key Features
- Full leg massage
- Air compression technology
- 6 massage modes
- 4 pressure levels
- 10, 20 and 30 minutes timing options
- Rechargeable battery
- Type-C charging port
- Memory function
Operation Instructions
1. Power Button
Long press the side power button for 1.5 seconds to power on the device. Press and hold this key again for 1.5 seconds to stop all massage actions when the timing time is up. Each indicator turns off, and the system shuts down and enters standby state.
2. Mode Selection
In the startup state, the icon on the panel will light up. Press the mode key to turn on the mode conversion function. The mode conversion can be performed in six ways:
- Sequence
- Circulation
- Whole
- Thigh
- Calf
- Foot
When closed, only the icon is on, and the corresponding indicators on the Sequence, Circulation, Whole, Thigh, Calf and Foot panels are all off.
3. Pressure Intensity Selection
In the startup state, the icon on the panel will light up. Press the strength key to turn on the pressure intensity conversion function, which can be used for cyclic intensity conversion in four levels:
- 50 mmHg
- 100 mmHg
- 150 mmHg
- 200 mmHg
The corresponding indicator on the panel will light up white.
4. Pause Function
In the startup state, press the pause key, and the product will enter the suspended state. Besides, all function keys are invalid. Press this key again and the product will continue to run.
5. Timer Selection
In the startup state, the icon on the panel will light up. Press the timing key to select three timing options:
- 10 minutes
- 20 minutes
- 30 minutes
The corresponding indicator on the panel will light up white.
Memory Function
The product has a memory function. The master will remember the current working mode state, including pressure gear and timing, after starting up, and keep it by default next time starting up.
Battery Display
- When the battery icon decreases with the battery power, the grid light is off.
- When the battery is charging, the battery icon lights up one by one. Stop charging after the battery is full. The icon indicator light shows that the white light does not blink and keeps on. When the charging cable is full, the battery diagram light is off.
Product Parameters
| Product Name |
Air compression leg massager |
| Model No. |
FE-7400 |
| Pressure Level |
50-100-150-200 mmHg |
| Noise |
≤55dB |
| Charging Port |
Type C |
| Battery |
3000mAh / 7.4V |
| Charging Current |
5V--2A |
| Charging Time |
About 235 minutes |
| Working Time |
About 190 minutes |
| Product Weight |
1.6KG |
| Input Voltage |
5V |
Cleaning Instructions
Controller
Wipe the display with a soft cloth.
Fabric
This product does not support washing. Please use alcohol sterilization or clean wet towel wipe.
Storage Requirements
- Keep this product out of reach of children.
- Keep away from moisture, heat, direct sunlight and water.
- If not used for a long time, it should be charged every two months.
Disposal
Dispose of discarded batteries in accordance with local regulations or environmental regulations.
Use Environment
| Parameter |
Use Environment |
Storage and Transportation |
| Temperature Range |
5°C ~ 40°C |
-10°C ~ +60°C |
| Humidity Range |
5% ~ 93% RH |
5% ~ 90% RH |
| Barometric Range |
86kPa ~ 105kPa |
86kPa ~ 105kPa |
Product Failure Analysis and Treatment
| Phenomenon |
Possible Causes |
Solution |
| Product cannot start |
Product battery depleted |
Charging for a period of time before turning on |
| Product cannot start |
If the timing is set, the machine will shut down automatically when the time is up |
Restart |
| Display Er1 character |
Over voltage alarm |
After automatic shutdown and voltage reduction, restart the machine |
| Low pressure display value |
The product has air leakage |
Within the shelf life, after-sales treatment can be carried out |
Product Safety Precautions
- Charging with adapters that do not meet the requirements of this product is prohibited.
- Non-professional repair technicians are prohibited from decomposing and repairing this product.
- If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer or its maintenance department and similar full-time personnel.
- Do not use in wet areas or when the product has penetrated into water or other liquids.
- After use, please place the massager in a dry place, away from humidity and direct sunlight.
- Do not place in fusible, explosive, chemical solution, damp place.
- Do not touch the product with sharp objects to prevent damage to the product parts.
- If you feel uncomfortable or abnormal during use, please stop using immediately.
- Do not use in high temperature environment.
- Please keep the product clean and use a dry towel during maintenance.
- Before using this product, it is recommended to consult a doctor or use under the guidance of a professional:
- High-risk pregnant women and children should not use.
- Mental patient.
- Suffer from skin infection, skin swelling, scalding burns, etc.
- High-risk patients who have a serious illness and are not suitable for massage.
- The injured have weak or damaging bones.
- People with cardiac pacemakers.
- The body is fitted with other metal devices, such as prosthetics.
- People with serious heart disease or abnormal blood pressure.
Additional Safety Information
- There is a possibility of personal injury and damage when used incorrectly.
- Please read the instructions carefully before using this product.
- Do not throw rubbish carelessly. Please dispose of it according to local regulations.
- Handle fragile items with care.
- Moisture-proof and rainproof.